Product name: Fully automatic waterproof material sample making machine
Product model: CP-600-A
Main functions:
Applicable to the sample cutting of various waterproof membranes, rubber, coatings, plastics, films, etc. using knives.
It is also suitable for testing the mechanical properties of building materials such as compression, bending, and flexure.
Based on standards:
GB/T 528 Determination of tensile stress-strain properties of vulcanized rubber or thermoplastic rubber;
GB/T 529 Determination of tear strength of vulcanized rubber or thermoplastic rubber (trouser-shaped, right-angled and crescent-shaped specimens);
The maximum cutting force can reach 10 tons, and it can cut multiple samples at a time with high work efficiency;
Automatic return after cutting, easy to operate;
The transmission structure of servo motor + synchronous belt + pulley + precision gapless ball screw:
The high-strength optical axis fixes the upper beam and the work surface to form a high-rigidity portal frame host:
High-precision spoke sensor, force measurement accuracy 0.5 level;
The corresponding cutting force can be set according to different materials to extend the service life of the cutter;
The cutter is made of fine processing, high manganese steel material, with a height error of ±0.1mm, to ensure the success rate of cutting multiple samples at one time;
The bottom of the host is designed with adjustable leveling feet to facilitate equipment placement and later adjustment;
Test force overload protection, safety limit protection, overcurrent and overvoltage protection, indicator light operation status prompt, voice operation prompt, and design emergency stop switch;
序号 | 项目 | 参数 |
1 | 最大试验力 | 100KN |
2 | 试验机级别 | 0.5级 |
3 | 工作台面净尺寸 | 600*600mm |
4 | 工作台最大移动行程 | 480mm |
5 | 电源及电机功率 | 220V，1.5KW |
6 | 主机尺寸（长*宽*高） | 1000×600×1850mm |
7 | 主机重量 | 约800kg |