Product name: Microcomputer controlled brick, tile, stone, gypsum board decorative board testing machine
Product model: WDW-20W
Product function: Test and study the flexural and bending resistance of various non-metallic composite panels such as various ceramic tiles, stones, tiles, cement fiber flat panels, gypsum boards, wall bricks, gypsum blocks, aerated blocks, etc.
Based on the standards:
GB/T 16491 Electronic universal testing machine
GB/T 2611 General technical requirements for testing machines
JJG 139 Tension, compression and universal testing machines
JJG 475 Electronic universal testing machine
GB/T 3810.1 Ceramic tile test method Part 1
GB/T 3810.4 Ceramic tile test method Part 4
DB37T 5067 Technical specification for application of FS external formwork cast-in-place concrete composite insulation system
GB/T 4100 Ceramic tile
GB/T 9775 Gypsum board
JC/T 997 Decorative gypsum board
GB/T 26204 Gypsum board facing paperboard
GB/T 17669.3 Building gypsum
GB/T 9776 Building gypsum
GB/T 2542 Test method for masonry bricks
GB 28635 Concrete pavement bricks
JC/T 239 Autoclaved fly ash bricks
JC/T 698 Gypsum blocks
JG/T 376 Sand-based permeable bricks
GB/T 411 Test methods for concrete blocks and bricks
GB/T 25993 Permeable pavement bricks and permeable road panels
JC/T 446 Concrete pavement bricks
JC/T 746 Concrete tiles
GB/T 36584 Test methods for roof tiles
GB/T 21149 Sintered tiles
GB/T 9966.1 Test methods for natural stone materials Part 1
GB/T 9966.2 Test methods for natural stone materials Part 2
Not listed in detail, can be added at will
The high-strength optical axis fixes the upper beam and the work surface to form a high-rigidity portal frame host:
The transmission structure of the servo motor + reducer + synchronous belt + pulley + precision gapless ball screw realizes the up and down movement of the beam, and the test process is realized through the measurement and control software:
High-precision spoke/S-type force sensor, force measurement accuracy 0.5 level;
A variety of perfect test fixtures, pin connection + simple nut locking, easy to operate;
Add extensometer, displacement meter, large deformation measuring instrument to accurately measure material deformation data;
Powerful full-digital closed-loop, multi-channel measurement and control system, built-in various detection method standards, automatic control of the test process, data can be saved and exported, and can be connected to multiple networked companies;
The bottom of the host is designed with a wheel/adjustable leveling foot to facilitate the equipment placement and later adjustment;
Modular electrical control box for easy troubleshooting;
Test force overload protection, safety limit protection, overcurrent and overvoltage protection, indicator light operation status prompt, voice operation prompt, and design emergency stop switch;
1 | 最大试验力 | 20kN |
2 | 试验机级别 | 0.5级 |
3 | 负荷测量范围 | 0.4%～100%FS |
4 | 示值相对误差 | ±0.5%以内 |
5 | 试验力分辨力 | 1/±500000FS |
6 | 变形测量范围 | 0.2%～100% |
7 | 力控速率调节范围 | 0.005%～5%FS/S |
8 | 力控速率控制精度 | 速率＜0.05%FS时，为±1%设定值以内； 速率≥0.05%FS时，为±0.5%设定值以内； |
9 | 变形速率调节范围 | 0.005～5%FS/s； |
10 | 变形速率控制精度 | 速率＜0.05%FS/s时，为设定值的±1%以内； 速率≥0.05%FS/s时，为设定值的±0.5%以内； |
11 | 最大位移速率 | 500mm/min |
12 | 位移速率控制精度 | 为设定值的±0.2%以内； |
13 | 恒力、恒变形、恒位移控制范围 | 0.5%～100%FS |
14 | 恒力、恒变形、恒位移控制精度 | 设定值≥10%FS时，为设定值的±0.5%以内 设定值＜10%FS时，为设定值的±1%以内 |
15 | 立柱最大间距 | 1100mm |
16 | 横梁最大移动距离 | 800mm |
17 | 电源电压 | 220V±10% 50Hz（须可靠接地） |
18 | 机器功率 | 750W |
19 | 主机尺寸（长*宽*高） | 1450x450x1800mm |
20 | 测控柜尺寸（长*宽*高） | 700x600x750mm |
21 | 机器重量 | ≈700kg |
22 | 控制柜重量 | ≈30kg |