Microcomputer controlled waterproof membrane tensile energy testing machine

Product name: Microcomputer controlled waterproofing membrane tensile energy testing machine
Product model: WDW-5G

Product function: used for testing the tensile properties, tearing properties (nail rod method), maximum peak tensile force, second peak tensile force, maximum peak elongation, second peak elongation, joint peel strength, joint tear strength, tensile strength, elongation at break, constant tensile stress, constant stress elongation, yield point tensile stress, yield point elongation, and permanent deformation at break of various waterproofing membranes.

Based on the standards:
GB/T 16491 Electronic universal testing machine
GB/T 2611 General technical requirements for testing machines
JJG 139 Tensile, pressure and universal testing machines
JJG 475 Electronic universal testing machine
GB/T 328.1~27 Test methods for building waterproofing membranes
GB 18242 Elastomer modified asphalt waterproofing membranes
GB 18243 Plastomer modified asphalt waterproofing membranes
GB 18967 Modified asphalt polyethylene waterproofing membranes
GB/T 14686 Petroleum asphalt glass fiber waterproofing membranes
GB/T 23457 Pre-laid/wet-laid waterproofing membranes
GB 12952 2011 Polyvinyl chloride waterproofing membranes
GB 12953 Chlorinated polyethylene waterproofing membranes
GB 27789 Thermoplastic polyolefin (TPO) waterproofing membranes
GB/T 18173.1~4 Polymer waterproof materials
JC/T 504 Aluminum foil petroleum asphalt waterproofing membrane
JT/T 536 Plastomer (APP) asphalt waterproofing membrane for roads and bridges
JC/T 645 Ternary butyl rubber waterproofing membrane
JC/T 684 Chlorinated polyethylene-rubber blend waterproofing membrane
JC/T 690 Asphalt composite tire flexible waterproofing membrane
JC 840 Self-adhesive rubber asphalt waterproofing membrane
JC 898 Self-adhesive polymer modified asphalt polyester tire waterproofing membrane
JC/T 974 Modified asphalt waterproofing membrane for roads and bridges
Not listed in detail, can be added at will

The high-strength optical axis fixes the upper beam and the work surface to form a high-rigidity portal frame host:
The transmission structure of the servo motor + reducer + synchronous belt + pulley + precision gapless ball screw realizes the up and down movement of the beam, and the test process is realized through the measurement and control software:
High-precision spoke/S-type force sensor, force measurement accuracy 0.5 level;
A variety of perfect test fixtures, pin connection + simple nut locking, easy to operate;
Add extensometer, displacement meter, large deformation measuring instrument to accurately measure material deformation data;
Powerful full-digital closed-loop, multi-channel measurement and control system, built-in various detection method standards, automatic control of the test process, data can be saved and exported, and can be connected to multiple networked companies;
The bottom of the host is designed with a wheel/adjustable leveling foot to facilitate the equipment placement and later adjustment;
Modular electrical control box for easy troubleshooting;
Test force overload protection, safety limit protection, overcurrent and overvoltage protection, indicator light operation status prompt, voice operation prompt, and design emergency stop switch;

1	传感器最大试验力	标配5KN（50KN以下任选一）
2	试验机级别	0.5级
3	负荷测量范围	0.4%-100%FS（0.5级）
4	示值相对误差	±0.5%（0.5级）
5	试验力分辨力	1/±500000F.S（全程分辨力不变）
6	变形测量范围	0.2%-100%
7	力控速率调节范围	0.005%-5%FS/S
8	力控速率控制精度	速率 <0.05%FS时，为±1%设定值以内；速率 ≥0.05%FS时，为±0.5%设定值以内；
9	变形速率调节范围	0.005～5%FS/s；
10	变形速率控制精度	速率＜0.05%FS/s时，为设定值的±1%以内；速率≥0.05%FS/s时，为设定值的±0.5%以内；
11	最大位移速率	600mm/min；
12	位移速率控制精度	为设定值的±0.2%以内；
13	恒力、恒变形、恒位移控制范围	0.5%-----100%FS
14	恒力、恒变形、恒位移控制精度	设定值≥10%FS时，为设定值的±0.5%以内设定值＜10%FS时，为设定值的±1%以内
15	立柱最大间距	450mm
16	横梁最大移动距离	1100mm
17	大变形测量范围	10-1000mm
18	电源	～220V±10% 50Hz（须可靠接地）
19	电机功率	750W
20	主机尺寸（长宽高）	≈760x450x2100mm
21	控制柜尺寸（长宽高）	≈700600750mm
22	主机重量	≈350kg
23	控制柜重量	≈30kg

Series Related Products